mirror of
https://github.com/gabrielkheisa/control-system.git
synced 2024-11-23 20:03:22 +07:00
69 lines
2.2 KiB
Markdown
69 lines
2.2 KiB
Markdown
|
# Integral Effect on Control System
|
||
|
|
This dir is belong to Control System class contains with Integral Effect on Control System. This code 100% original made by my hand :), please leave some notes if you're going to use it. Thanks!
|
||
|
|
|
||
|
|
## Software
|
||
|
|
This program run in Matlab
|
||
|
|
|
||
|
|
## Variables
|
||
|
|
`s = tf('s');` defines s as 'frequency domain' for transfer function and will be used further.
|
||
|
|
```
|
||
|
|
J = 0.01;
|
||
|
|
b = 0.1;
|
||
|
|
K = 0.01;
|
||
|
|
R = 1;
|
||
|
|
L = 0.5;
|
||
|
|
```
|
||
|
|
Those variable comes from BLDC control system.
|
||
|
|
```
|
||
|
|
Kp = 1;
|
||
|
|
% Ki = 1;
|
||
|
|
% Ki = 3;
|
||
|
|
% Ki = 5;
|
||
|
|
Ki = 7;
|
||
|
|
% Ki = 9;
|
||
|
|
```
|
||
|
|
Variable above is the constant from PI control, we're trying to varies the constant to analyze integral effect on control system
|
||
|
|
|
||
|
|
## Process
|
||
|
|
The BLDC motor control system should be defined as transfer function by initialize its numerator-denumerator and *tf()* function.
|
||
|
|
```
|
||
|
|
num_motor = [K];
|
||
|
|
den_motor = [J*L J*R+b*L R*b+K*K];
|
||
|
|
|
||
|
|
motor = tf(num_motor,den_motor)
|
||
|
|
```
|
||
|
|
Besides the plant function, the PI-control system defined by `C = tf([Kp Ki],[1 0])`. The vector is set according to PI formula which `PI = Kp * Ki/s`. After that, both of system are multiplied each others without feedback by `complete = feedback(motor*C,1);`
|
||
|
|
|
||
|
|
That system will be test with step, ramp, and impulse input by call below lines
|
||
|
|
```
|
||
|
|
subplot(311), impulse(complete); % Impulse reponse
|
||
|
|
subplot(312), step(complete); % Step Response
|
||
|
|
subplot(313), step(complete / s); % Ramp response
|
||
|
|
stepinfo(complete)
|
||
|
|
```
|
||
|
|
|
||
|
|
Since Matlab doesn't provide any steady-state error calculation, we process it by call below lines
|
||
|
|
```
|
||
|
|
[y,t] = step(complete); % Calculate Steady-State error
|
||
|
|
sse = abs(1 - y(end))
|
||
|
|
```
|
||
|
|
Last line works to limit the graph
|
||
|
|
```
|
||
|
|
xlim([0 50])
|
||
|
|
ylim([0 3])
|
||
|
|
```
|
||
|
|
|
||
|
|
|
||
|
|
## Testing
|
||
|
|
| Kp = 1 | Ki = 1 | Ki = 3 | Ki = 5 | Ki = 7 | Ki = 9 |
|
||
|
|
|--- |--- |--- |--- |--- |--- |
|
||
|
|
| Rise Time | 22.7723 | 6.7782 | 3.5914 | 2.3175 | 2.3175 |
|
||
|
|
| Settling Time | 40.3716 | 12.1907 | 6.3158 | 3.6779 | 3.6779 |
|
||
|
|
| Overshoot | 0 | 0 | 0 | 0.3523 | 0 |
|
||
|
|
| SSE | 1.7396e-06 | 0.0034 | 0.0033 | 0.0034 | 6.6536e-05 |
|
||
|
|
|
||
|
|
### Notes
|
||
|
|
Contact nanda.r.d@mail.ugm.ac.id for more information
|
||
|
|
### Links
|
||
|
|
You can access the source code here
|
||
|
|
[github.com/nandard/routh_table.git](https://github.com/nandard/routh_table.git)
|